Power supply: Voltage: 12VDC, working current: 150mA
Ambient temperature: Working: 0 ℃ ...... 45 ℃; storage: -10 ℃ ...... 55 ℃;
Relative humidity: Work: 40% RH ...... 90% RH ; storage: 20 % RH ...... 90% RH;
Internal card reader: ID type: 125Kz, EM or compatible card

Effective card capacity: 500
General Password: Group 1
PIN: 500 group (or password card, card + PIN ready mode 500 are set PIN)
to open the door: a card or password, card + password
Alarm: Timeout door is not closed forced door
peripheral Interface: electric lock (with relay output and level output), door, door, door open button
programming mode: the keyboard
subtraction card mode: continuous increments carboplatin, delete a single card
dimensions: 116 * 116 * 21mm

 1.         Product Specification

2.         factory defaults

3. The           acousto-optical display

3.1           Under normal operating conditions:

3.1.1.           Effective instruction: short beep sound  

3.1.2           invalid command: Long beep sound

3.2           programming mode:

3.2.1.           The green light

3.2.2.           Effective instruction: beep twice

3.2.3.           Invalid instruction: beep beep three times

4.           Undo command unfinished:

Before type instruction is not completed, pressing the [*] key, the instruction can revoke

The         function and arrangement

5.1        Enter Programming:

[*] + [6 -bit programming code ] toot, default: 990 101

5.2        modify the programming code:

[0]

+ [ Enter . 6 one new programming code ]

+ [ Re-enter . 6 one new programming code ]

5.3        Setting valid card:

[5]

+ [ Input . 3 bit code ] beeps

+ [ Induction card 1] toot, toot

+ [ Proximity card 2] toot, toot

+……

+ [ Induction card n] toot, toot

+ [*] Toot, complete Jiaka

5.3.1       . 3 -bit code: is 001 - 500 non-repeatable number between. The coding is an important way to remove the card after the card is lost, please coding card issuers who properly preserved

5.3.2.       Continuous setting is valid cards, each encoded by a coded card in front of +1 increment. For example, the input code is 015 , when the reader again, re-encoding card is 016 ...... and so on

5.3.3.       Effective card default PIN: 0000

5.4        Delete valid card:

5.4.1       coding delete card:

[7]

+ [ Input . 3 bit code 1] beeps

+ [ Input . 3 bit code 2] beeps

+……

+ [ Input . 3 bit code n] beeps

+ [*] Toot, complete delete card